--------------------------------------------------------------------------------------- SYS_Info 1 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 25 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 25 (0x19) System Information Type 1 Cell Channel Description GSM Format Id 128 Range Format ARFCNs [0] : 980 RACH Control Parameter Max Retrans : Maximum 4 retransmissions Tx Integer : 32 slots used to spread transmission Cell Bar Access : not barred RE : allowed AC C : 0 SI 1 Rest Octets Band Indicator : 1800 Band --------------------------------------------------------------------------------------- SYS_Info 2 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 26 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 26 (0x1A) System Information Type 2 BCCH Frequency List Ext Ind : The information element carries only a part of the BA BA Ind : 1 Bit Map 0 ARFCNs NCC Permitted : 255 RACH Control Parameter Max Retrans : Maximum 4 retransmissions Tx Integer : 32 slots used to spread transmission Cell Bar Access : not barred RE : allowed AC C : 0 --------------------------------------------------------------------------------------- SYS_Info 2bis --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 2 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 2 (0x2) System Information Type 2bis Extended BCCH Frequency List Ext Ind : The information element carries only a part of the BA BA Ind : 1 128 Range Format ARFCNs [0] : 975 [1] : 976 [2] : 977 [3] : 978 [4] : 979 [5] : 980 RACH Control Parameter Max Retrans : Maximum 4 retransmissions Tx Integer : 32 slots used to spread transmission Cell Bar Access : not barred RE : allowed AC C : 0 --------------------------------------------------------------------------------------- SYS_Info 2Ter --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 3 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 3 (0x3) System Information Type 2ter Extended BCCH Frequency List Multiband Reporting : 3 Ba Ind : 1 128 Range Format ARFCNs [0] : 762 [1] : 764 [2] : 858 SI 2ter Rest Octets --------------------------------------------------------------------------------------- SYS_Info 2QuaTer --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 7 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 7 (0x7) System Information Type 2quater SI 2 quater Rest Octets BA Ind : 1 3G Ba Ind : 1 MP Change Mark : 1 SI2quater Index : 0 SI2quater Count : 4 Measurement Parameters Description Report Type : The MS shall use the Measurement Report message for reporting. Serving Band Reporting : 2 3G Neighbour Cell Description UTRAN FDD Description Bandwidth FDD : 0 Item [0] FDD ARFCN : 2965 FDD Indic0 : 0 Nr Of FDD Cells : 8 Cells [0] Diversity : 0 Scrambling Code : 66 [1] Diversity : 0 Scrambling Code : 29 [2] Diversity : 0 Scrambling Code : 97 [3] Diversity : 0 Scrambling Code : 28 [4] Diversity : 0 Scrambling Code : 76 [5] Diversity : 0 Scrambling Code : 61 [6] Diversity : 0 Scrambling Code : 162 [7] Diversity : 0 Scrambling Code : 27 3G Measurement Parameters Description Qsearch I : Always Qsearch C Initial : Always FDD Qoffset : always select a cell if acceptable FDD Rep Quant : Ec/No FDD Multirat Reporting : 2 FDD Qmin : -12 dB 3G CCN Active : CCN towards 3G cells is disabled in the cell Priority and E-UTRAN Parameters Description 3G Priority Parameters Description UTRAN Start : This is the first instance of the message UTRAN Stop : This is not the last instance of the message --------------------------------------------------------------------------------------- SYS_Info 2QuaTer --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 7 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 7 (0x7) System Information Type 2quater SI 2 quater Rest Octets BA Ind : 1 3G Ba Ind : 1 MP Change Mark : 1 SI2quater Index : 1 SI2quater Count : 4 3G Neighbour Cell Description Index Start 3g : 8 UTRAN FDD Description Bandwidth FDD : 0 Item [0] FDD ARFCN : 2965 FDD Indic0 : 0 Nr Of FDD Cells : 8 Cells [0] Diversity : 0 Scrambling Code : 339 [1] Diversity : 0 Scrambling Code : 264 [2] Diversity : 0 Scrambling Code : 341 [3] Diversity : 0 Scrambling Code : 206 [4] Diversity : 0 Scrambling Code : 340 [5] Diversity : 0 Scrambling Code : 277 [6] Diversity : 0 Scrambling Code : 426 [7] Diversity : 0 Scrambling Code : 164 3G CCN Active : CCN towards 3G cells is disabled in the cell Priority and E-UTRAN Parameters Description 3G Priority Parameters Description UTRAN Start : This is not the first instance of the message UTRAN Stop : This is not the last instance of the message --------------------------------------------------------------------------------------- SYS_Info 2QuaTer --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 7 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 7 (0x7) System Information Type 2quater SI 2 quater Rest Octets BA Ind : 1 3G Ba Ind : 1 MP Change Mark : 1 SI2quater Index : 2 SI2quater Count : 4 3G Neighbour Cell Description Index Start 3g : 16 UTRAN FDD Description Bandwidth FDD : 0 Item [0] FDD ARFCN : 10639 FDD Indic0 : 0 Nr Of FDD Cells : 4 Cells [0] Diversity : 0 Scrambling Code : 506 [1] Diversity : 0 Scrambling Code : 505 [2] Diversity : 0 Scrambling Code : 507 [3] Diversity : 0 Scrambling Code : 504 3G CCN Active : CCN towards 3G cells is disabled in the cell Priority and E-UTRAN Parameters Description 3G Priority Parameters Description UTRAN Start : This is not the first instance of the message UTRAN Stop : This is the last instance of the message Repeated UTRAN Priority Parameters [0] UTRAN Frequency Index [0] : 0 [1] : 1 UTRAN Priority : 1 Thresh UTRAN High : 4 dB Thresh UTRAN Low : 36 dB UTRAN Qrxlevmin : -119 dBm --------------------------------------------------------------------------------------- SYS_Info 2QuaTer --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 7 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 7 (0x7) System Information Type 2quater SI 2 quater Rest Octets BA Ind : 1 3G Ba Ind : 1 MP Change Mark : 1 SI2quater Index : 3 SI2quater Count : 4 3G CCN Active : CCN towards 3G cells is disabled in the cell Priority and E-UTRAN Parameters Description Serving Cell Priority Parameters Description GERAN Priority : 0 Thresh Priority Search : Always search Thresh GSM Low : Always allowed H_PRIO : disabled T_Reselection : 5 s E-UTRAN Parameters Description E-UTRAN CCN Active : The broadcast E-UTRAN_CCN_ACTIVE parameter shall apply if applicable. Otherwise, CCN towards E-UTRAN cells is disabled in the cell E-UTRAN Start : This is the first instance of the message E-UTRAN Stop : This is not the last instance of the message E-UTRAN Measurement Parameters Description Qsearch_C_E-UTRAN_Initial : Never E-UTRAN_REP_QUANT : RSRP E-UTRAN_MULTIRAT_REPORTING : 2 E-UTRAN_FDD_MEASUREMENT_REPORT_OFFSET : 0 E-UTRAN_FDD_REPORTING_THRESHOLD_2 : 0 E-UTRAN_FDD_REPORTING_OFFSET : 0 REPORTING_GRANULARITY : 0 GPRS E-UTRAN Measurement Parameters Description Qsearch_P_E-UTRAN : Always E-UTRAN_REP_QUANT : RSRP E-UTRAN_MULTIRAT_REPORTING : 2 E-UTRAN_FDD_REPORTING_THRESHOLD : 0 E-UTRAN_FDD_REPORTING_THRESHOLD_2 : 0 E-UTRAN_FDD_REPORTING_OFFSET : 0 E-UTRAN Neighbour Cells [0] Element [0] EARFCN : 6200 Measurement Bandwidth : NRB = 50 E-UTRAN_PRIORITY : 5 THRESH_E-UTRAN_high : 12 dB THRESH_E-UTRAN_low : 20 dB E-UTRAN_QRXLEVMIN : -140 dBm --------------------------------------------------------------------------------------- SYS_Info 2QuaTer --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 7 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 7 (0x7) System Information Type 2quater SI 2 quater Rest Octets BA Ind : 1 3G Ba Ind : 1 MP Change Mark : 1 SI2quater Index : 4 SI2quater Count : 4 3G CCN Active : CCN towards 3G cells is disabled in the cell Priority and E-UTRAN Parameters Description E-UTRAN Parameters Description E-UTRAN CCN Active : The broadcast E-UTRAN_CCN_ACTIVE parameter shall apply if applicable. Otherwise, CCN towards E-UTRAN cells is disabled in the cell E-UTRAN Start : This is not the first instance of the message E-UTRAN Stop : This is the last instance of the message E-UTRAN Neighbour Cells [0] Element [0] EARFCN : 1800 Measurement Bandwidth : NRB = 100 E-UTRAN_PRIORITY : 6 THRESH_E-UTRAN_high : 12 dB THRESH_E-UTRAN_low : 16 dB E-UTRAN_QRXLEVMIN : -140 dBm [1] Element [0] EARFCN : 325 Measurement Bandwidth : NRB = 50 [1] EARFCN : 3175 Measurement Bandwidth : NRB = 75 E-UTRAN_PRIORITY : 7 THRESH_E-UTRAN_high : 12 dB THRESH_E-UTRAN_low : 12 dB E-UTRAN_QRXLEVMIN : -140 dBm --------------------------------------------------------------------------------------- SYS_Info 3 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 27 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 27 (0x1B) System Information Type 3 Cell Identity Cell Identity : 30111 Location Area Identification MCC : Belgium MNC : 20 Operator : Base/KPN LAC : 1303 Control Channel Description MSC Release : MSC is Release '99 onwards Attach-detach allowed : MSs in the cell shall apply IMSI attach and detach procedure BS AG BLKS RES : 1 CCCH CONF : 1 basic physical channel used for CCCH, not combined with SDCCHs SYSTEM INFORMATION TYPE 22 indicator : not broadcast Cell Bar Qualify 3 : Iu mode not supported BS PA MFRMS : 4 multiframes period for transmission of PAGING REQUEST messages to the same paging subgroup T3212 Timeout Value : 40 Cell Options DN-Ind : 0 PWRC : not set DTX : The MSs shall use uplink discontinuous transmission Radio Link Timeout : 20 Cell Selection Parameters Cell Reselect Hysteresis : 6 dB RXLEV hysteresis for LA re-selection MS TXPWR MAX CCH : 0 ACS : System information type 16 and 17 are not broadcast on the BCCH NECI : supported Rxlev Access Min : 5 RACH Control Parameters Max Retrans : Maximum 4 retransmissions Tx Integer : 32 slots used to spread transmission Cell Bar Access : not barred RE : allowed AC C : 0 SI 3 Rest Octets CBQ : 0 Cell Reselect Offset : 8 dB Temporary Offset : 0 dB Penalty Time : Cell Reselect Offset is subtracted from C2 and Temporary Offset is ignored System Information 2ter Indicator : available Early Classmark Sending Control : allowed GPRS Indicator RA Colour : 0 SI13 Position : sent on BCCH Norm 3G Early Classmark Sending Restriction : Neither UTRAN nor cdma2000 classmark change messages shall be sent with the Early classmark sending SI2quater Position : sent on BCCH Ext --------------------------------------------------------------------------------------- SYS_Info 4 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 28 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 28 (0x1C) System Information Type 4 Location Area Identification MCC : Belgium MNC : 20 Operator : Base/KPN LAC : 1303 Cell Selection Parameters Cell Reselect Hysteresis : 6 dB RXLEV hysteresis for LA re-selection MS TXPWR MAX CCH : 5 ACS : System information type 16 and 17 are not broadcast on the BCCH NECI : supported Rxlev Access Min : 5 RACH Control Parameters Max Retrans : Maximum 4 retransmissions Tx Integer : 32 slots used to spread transmission Cell Bar Access : not barred RE : allowed AC C : 0 SI 4 Rest Octets SI4 Rest Octets O Optional Selection Parameters CBQ : 0 Cell Reselect Offset : 0 dB Temporary Offset : 0 dB Penalty Time : 20 s GPRS Indicator RA Colour : 0 SI13 Position : sent on BCCH Norm --------------------------------------------------------------------------------------- SYS_Info 5 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : DL_SACCH Type : 29 Length : 18 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 29 (0x1D) System Information Type 5 BCCH Frequency List Ext Ind : The information element carries only a part of the BA BA Ind : 0 128 Range Format ARFCNs [0] : 128 --------------------------------------------------------------------------------------- SYS_Info 13 --------------------------------------------------------------------------------------- GSM RR Signaling Message Channel : BCCH Type : 0 Length : 23 Direction : Network to UE Skip indicator : No indication of selected PLMN Protocol Discriminator : Radio Resources Management Message ID : 0 (0x0) System Information Type 13 SI 13 Rest Octets BCCH Change Mark : 2 SI Change Field : Update of unspecified SI message or SI messages RAC : 1 SPGC CCCH Sup : SPLIT_PG_CYCLE is not supported on CCCH in this cell Priority Access Thr : packet access is allowed for priority level 1 to 4 Network Control Order : NC0 - MS controlled cell re-selection, no measurement reporting GPRS Cell Options NMO : Network Mode of Operation II T3168 : 2500 ms T3192 : 500 ms DRX Timer Max : 2 s Access Burst Type : 8 bit format shall be used Control Ack Type : default format is RLC/MAC control block BS CV Max : 15 Pan Dec : 0 Pan Inc : 1 Pan Max : maximum value allowed for counter N3102 is 32 Extension Length : 14 EGPRS Supported : supported by cell EGPRS Packet Channel Request : EGPRS capable MSs shall use EGPRS PACKET CHANNEL REQUEST message for uplink TBF establishment on the PRACH when there is a PBCCH in cell or on the RACH when there is no PBCCH in the cell BEP PERIOD : 5 PFC Feature Mode : not support DTM Support : not supported BSS Paging Coordination : support CCN Active : enabled NW Ext UTBF : supported Multiple TBF Capability : not supported Ext UTBF No Data : The mobile station may refrain from sending a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network. DTM Enhancements Capability : not supported GPRS Power Control Parameters ALPHA : 0.6 dB T_AVG_W : 2^(0/2) multiframes/ 6 T_AVG_T : 2^(0/2) multiframes/ 6 PC_MEAS_CHAN : downlink measurements for power control shall be made on BCCH N_AVG_I : 2^(0/2) SGSNR : SGSN is Release '99 onwards SI Status Ind : The network supports the PACKET SI STATUS message